NEVER DUMP YOUR TANKS AGAIN!
E.N.D. PLATE is a NON-CYANIDE product
Never etch another part with END PLATE
E.N.D.-PLATE strips all electroless nickel deposits from the following metals:
- mild steel
- high and low carbon steel
- tool steel (e.g. D2, S7, H13, etc…)
- stainless steels 300 & 400 series
- cast iron
- 17-4 PH
- Tungston Cobalt Carbide from jet engine parts
- Chrome Carbide (high velocity oxi-fuel) from jet engine parts
E.N.D-Plate was developed to replace cyanide strippers and competitive cyanide-free solutions. These products are notoriously slow stripping and short-lived, which makes them cost prohibitive. Companies using sulfuric stripping baths face the problem of etching parts if excessive water is introduced into the stripping bath. E.N.D-Plate has eliminated theses problems.
E.N.D-Plate is also formulated to never have to be dumped. A bath life so extraordinary, the oldest bath dates back to 1982, and is still operational with only minimal additions of E.N.D-Plate to maintain stripping rate. This is cost effective and environmentally better than dumping hazardous materials.